News
-
23-04-2026
Hertecant's High-Pressure Forging Solutions
In a remarkable feat of engineering, Hertecant Flanges has successfully forged two impressive pieces weighing over 650Kg each in Duplex material. These components are not just a testament to our capability but also highlight the precision and speed with which...
-
29-10-2024
Again a new Turning Center machine is installed at Hertecant Flanges.
Beginning of March, a new High Performance Y-axis Horizontal Turning Center is installed at Hertecant Flanges. Our CNC-machines are delivered by Germond, the exclusive dealer of DN Solutions in Belgium. Standard, straightforward flanges through to high-precision flanges in standard stainless...
-
17-10-2024
Hertecant Flanges invests in Solar Panel Project!
In September, Hertecant Flanges installed 614 solar panels generating a maximum power of 276KWp. This cost saving investment is a part of our general company sustainability goal related to energy-efficiency & employment with a minimal emission for our climate.
-
12-09-2024
Hertecant Flanges nominated for the BVA Private Equity Awards
Hertecant Flanges is proud to announce that we’re one of the 3 nominees for the BVA Private Equity Awards in the category ‘Buy-out Company of the year’. The awards celebrate successful private equity and venture capital backed Belgian companies. We’re...
-
13-08-2024
1.4306/304L : New material in our Hertecant material portfolio! In addition to 1.4307/1.4301 and from now on, Hertecant Flanges can forge & machine flanges in 1.4306/304L material. This Austenitic Chromium-Nickel Stainless steel has a low Carbon and slightly higher Chromium...
-
03-05-2024
All spectacle blinds and spacers great and small
Hertecant Flanges can supply a wide range of spectacle blinds, spacer rings and paddle blinds. Forged or from plate, according ASME B16.48 or customers specifications in all available materials. Do not hesitate to send your requests to our sales team.
-
08-04-2024
Another new CNC machines installed
Last week, another Doosan CNC machine was installed (Puma 5100). This is replacing an old CNC machines and makes it possible to machine special flanges with smaller tolerances. Our machines are delivered by Germond, the exclusive dealer of DN Solutions...
-
20-03-2024
Customers visiting the Hertecant factory in February & March
End of February, a delegation of young talents from Arcus Belgium visited our factory. End of February and beginning of March, two delegations of Stappert Holland visited the Hertecant factory. This practical experience will help them to better understand the...
-
10-01-2024
Long welding neck flanges for Italy!
Last December, 4x long welding neck flanges (EN type 21 DN150 PN40) were delivered in 2 weeks time. These flanges have non-standard lengths and are forged in 1.4571 (316Ti) material for our sister company “Special Flanges” in Italy.
-
19-12-2023
2x Special Spacer flanges in F44 in 3 weeks time
Beginning of December, Hertecant Flanges delivered 2x spacer flanges 16” Cl600 in F44 (6MO) with special thickness and according customers specifications. They were shipped to one of our customers in Denmark in 3 weeks time.
-
01-12-2023
Merry Christmas
The Hertecant team wishes everyone of you a Merry Christmas enjoying year end with family and friends. Our factory and warehouse will be closed from December 25th until January 1st. Our sales office will remain open.
-
23-11-2023
Talking about special flanges?
During the holiday period, Hertecant flanges delivered 2 oval flanges to one of their German customers. Flanges were made of 904L super austenitic stainless steel and fully machined according customers’ drawing.
-
06-10-2023
24 Extra long welding necks for France
In September, we delivered 24pcs of extra long (421mm) welding neck flanges 2” Cl300 in 316L for one of our French customers in 3 weeks time. Another clever piece of craftmanship.
-
01-10-2023
2x 8” self-reinforced tubes for Holland
End of August, two 8” special tubes in 321H were delivered to one of our Dutch customers as a part of a bigger order.” It should not always be a flange, as long as we can forge & machine it”...
-
23-09-2023
Successful renewal of ISO 9001 Management System Certificate
End of August, Hertecant Flanges was audited for the 3 yearly renewal of their ISO 9001 Management system certificate. A Belgian auditor of DNV business assurance BV inspected our management procedures during a 2-day audit. This certificate is valid...
-
10-09-2023
Arcus young talents visited the Hertecant factory
In September, a delegation of young talents from Arcus Netherlands visited our factory. This practical experience will help them to better understand the Hertecant business model and market in the flange industry. It will also help them to better serve...
-
01-07-2023
Hertecant Flanges for Vega instrumentation applications
Our flanges are commonly used in instrumentation applications. In March, we received an order from Vega Grieshaber KG for a special “to drawing” blind flange DN80 PN320 in Alloy 22. This flange was mounted on their Vegaflex 86, a level...
-
07-06-2023
Hertecant Flanges Summer Season!
The Hertecant Flanges NV factory and sales office will not have a closing period during the summer season. Do take into account that reduced staff can cause longer delivery times in July & August. We do have our National Holiday...
-
01-06-2023
1983 - 2023: 40 years Hertecant Flanges
40 years ago, Mr & Mrs Hertecant founded Hertecant. From the start, Hertecant focussed on quality & customer service. After some ups & downs, Hertecant Flanges took a new start in 2011 and in 2014, Private equity & management jointly...
-
25-02-2022
Ready to join the Hertecant Flanges Sales Team?
-
25-03-2021
Wij zoeken gemotiveerde CNC operatoren M/V
Wij zijn op zoek naar gemotiveerde talentvolle CNC operatoren die ons bedrijf willen versterken. Interesse? U vindt de volledige vacature op onderstaande link. CNC Draaier
-
17-03-2021
How do you obtain certified flanges for ships?
Do you need to order flanges for the refitting or construction of a ship? Then two things are crucial: the speed of delivery and, quite often, the certification of the material. How can you obtain flanges that carry the proper...
-
09-03-2021
New PED certificate now available.
End of last year, we renewed our PED and AD2000-Merkblatt W0 approval for the next 3 years. It took some time from TÜV SÜD to generate the new certificate, but it is now available in our certification library.
-
23-02-2021
Ivan Hertecant ° 02/03/1958 - † 18/02/2021
With great sorrow we inform you about the loss of Ivan Hertecant, the founder of Hertecant Flanges, who passed away last Thursday, February 18th 2021. We express our sincere sympathy to his family. You can offer your condolences using...
-
21-12-2020
Merry Christmas
The Hertecant team wishes you all a Merry Christmas! Note that our production will be closed between Christmas and New Year. Our sales office will remain open between Christmas and New Year.
-
30-11-2020
Update on our certificates & approvals: Positive PED audit & approved PDO.
Positive PED audit result. On Friday November 20th, we passed the audit by TÜV SÜD for the renewal of our PED 2014/68/EU and AD 2000-W0 certification. While waiting on the official certificates, you can download this declaration form from our website....
-
05-11-2020
How flanges are manufactured? (video)
Have you ever wondered how flanges or forgings are manufactured? We’ve created a video that explains how we fabricate our flanges. Stay tuned, because more is about to come!
-
03-11-2020
What conditions should flanges meet for the gauge manufacturer?
Do you or your customer need to install a gauge in a pipe? If so, you can realize the connections in different ways. But the best way to do so is by using flanges. Why exactly? And what requirements do...
-
08-09-2020
Yes, we did it again!
Beginning of September, Hertecant Flanges delivered 2x 32 Inch welding neck flanges Cl 300 in 304L according ASME B16.47 series B. Customer picked up the flanges 2-3 weeks after the order date. Hertecant is continuously looking for new challenges and...
-
07-07-2020
National Holiday
HERTECANT FLANGES NV will be closed on JULY 20th and 21st due to our National Holiday.
-
02-07-2020
Introducing our new brand identity
We’re excited to present you today our new brand identity, with a new logo, color scheme, and updated website. We’ve worked hard to make sure it better reflects our core values. Therefore we want to share our motivation with you....
-
09-04-2020
Hertecant Flanges invests in precision measuring arm.
Delivering high quality flanges is one of our strengths. Customized flanges often go along with specific tolerances and special shapes. Accurate measuring is therefore mandatory to assure our quality.
-
09-04-2020
Pushing our boundaries
We managed to forge & machine a 2,5″ and 4″ Long Welding Neck Flange in 904L with external thread and a wall thickness of only 3,6mm. Hertecant Flanges will continue to push its boundaries by challanging our forging and machining...
-
02-12-2019
Hertecant Flanges invests in new conventional lathe machine.
Beginning of November, Hertecant Flanges installed a new conventional lathe machine. We herewith are not only expanding our capacity, but also renovating our machine park.
-
18-12-2018
HERTECANT FLANGES, partner for specials!
End of November, 2x 14″ Cl150 long welding neck flanges (runpipe dia 1200mm) in 316L were produced and shipped in 2 week delivery time. Once again a typical job for Hertecant Flanges!
-
19-06-2018
New CNC turning & drilling center in operation
Since May, our new and biggest CNC-machine is fully operational. It is capable of machining flanges up to 1400mm diameter. It will guarantee the continuity of the machining process of our larger flange range. Besides this, it will cover the...
-
12-03-2018
Hertecant Flanges on AML Exxon Mobile
Hertecant Flanges NV has been approved by Exxon Mobile as Flange manufacturer. Herewith Hertecant is noted on the Qualifed Manufacturer List of Exxon Mobile, Piping-AML (Approved Manufacturers List) . This opens extra opportunities for all our contacts worldwide.
-
22-01-2018
Ring role machine in operation
In January , we managed to produce a 28″ Cl150 Welding Neck Flange in 316L on our ring rolling machine. This flange was for one of our customers in Germany. Besides this, we also rolled the first titanium rings. We are continuously improving our...
-
20-08-2017
WANTED : World wide freelance sales representatives
Hertecant Flanges has the ambition to grow on a worldwide scale. Therefore we are looking for local representatives in several countries all around the globe. Their task is to look for new customers in their region on an independent base....
Last week, another Doosan CNC machine was installed (Puma 5100). This is replacing an old CNC machines and makes it possible to machine special flanges with smaller tolerances. Our machines are delivered by Germond, the exclusive dealer of DN Solutions...
End of February, a delegation of young talents from Arcus Belgium visited our factory. End of February and beginning of March, two delegations of Stappert Holland visited the Hertecant factory. This practical experience will help them to better understand the...
Last December, 4x long welding neck flanges (EN type 21 DN150 PN40) were delivered in 2 weeks time. These flanges have non-standard lengths and are forged in 1.4571 (316Ti) material for our sister company “Special Flanges” in Italy.
Beginning of December, Hertecant Flanges delivered 2x spacer flanges 16” Cl600 in F44 (6MO) with special thickness and according customers specifications. They were shipped to one of our customers in Denmark in 3 weeks time.
The Hertecant team wishes everyone of you a Merry Christmas enjoying year end with family and friends. Our factory and warehouse will be closed from December 25th until January 1st. Our sales office will remain open.
During the holiday period, Hertecant flanges delivered 2 oval flanges to one of their German customers. Flanges were made of 904L super austenitic stainless steel and fully machined according customers’ drawing.
In September, we delivered 24pcs of extra long (421mm) welding neck flanges 2” Cl300 in 316L for one of our French customers in 3 weeks time. Another clever piece of craftmanship.
End of August, two 8” special tubes in 321H were delivered to one of our Dutch customers as a part of a bigger order.” It should not always be a flange, as long as we can forge & machine it”...
End of August, Hertecant Flanges was audited for the 3 yearly renewal of their ISO 9001 Management system certificate. A Belgian auditor of DNV business assurance BV inspected our management procedures during a 2-day audit. This certificate is valid...
In September, a delegation of young talents from Arcus Netherlands visited our factory. This practical experience will help them to better understand the Hertecant business model and market in the flange industry. It will also help them to better serve...
Our flanges are commonly used in instrumentation applications. In March, we received an order from Vega Grieshaber KG for a special “to drawing” blind flange DN80 PN320 in Alloy 22. This flange was mounted on their Vegaflex 86, a level...
The Hertecant Flanges NV factory and sales office will not have a closing period during the summer season. Do take into account that reduced staff can cause longer delivery times in July & August. We do have our National Holiday...
40 years ago, Mr & Mrs Hertecant founded Hertecant. From the start, Hertecant focussed on quality & customer service. After some ups & downs, Hertecant Flanges took a new start in 2011 and in 2014, Private equity & management jointly...
Wij zijn op zoek naar gemotiveerde talentvolle CNC operatoren die ons bedrijf willen versterken. Interesse? U vindt de volledige vacature op onderstaande link. CNC Draaier 
Do you need to order flanges for the refitting or construction of a ship? Then two things are crucial: the speed of delivery and, quite often, the certification of the material. How can you obtain flanges that carry the proper...
End of last year, we renewed our PED and AD2000-Merkblatt W0 approval for the next 3 years. It took some time from TÜV SÜD to generate the new certificate, but it is now available in our certification library.
With great sorrow we inform you about the loss of Ivan Hertecant, the founder of Hertecant Flanges, who passed away last Thursday, February 18th 2021. We express our sincere sympathy to his family. You can offer your condolences using...
The Hertecant team wishes you all a Merry Christmas! Note that our production will be closed between Christmas and New Year. Our sales office will remain open between Christmas and New Year.
Positive PED audit result. On Friday November 20th, we passed the audit by TÜV SÜD for the renewal of our PED 2014/68/EU and AD 2000-W0 certification. While waiting on the official certificates, you can download this declaration form from our website....
Have you ever wondered how flanges or forgings are manufactured? We’ve created a video that explains how we fabricate our flanges. Stay tuned, because more is about to come!
Do you or your customer need to install a gauge in a pipe? If so, you can realize the connections in different ways. But the best way to do so is by using flanges. Why exactly? And what requirements do...
Beginning of September, Hertecant Flanges delivered 2x 32 Inch welding neck flanges Cl 300 in 304L according ASME B16.47 series B. Customer picked up the flanges 2-3 weeks after the order date. Hertecant is continuously looking for new challenges and...
HERTECANT FLANGES NV will be closed on JULY 20th and 21st due to our National Holiday.
We’re excited to present you today our new brand identity, with a new logo, color scheme, and updated website. We’ve worked hard to make sure it better reflects our core values. Therefore we want to share our motivation with you....
Delivering high quality flanges is one of our strengths. Customized flanges often go along with specific tolerances and special shapes. Accurate measuring is therefore mandatory to assure our quality.
We managed to forge & machine a 2,5″ and 4″ Long Welding Neck Flange in 904L with external thread and a wall thickness of only 3,6mm. Hertecant Flanges will continue to push its boundaries by challanging our forging and machining...
Beginning of November, Hertecant Flanges installed a new conventional lathe machine. We herewith are not only expanding our capacity, but also renovating our machine park. 
End of November, 2x 14″ Cl150 long welding neck flanges (runpipe dia 1200mm) in 316L were produced and shipped in 2 week delivery time. Once again a typical job for Hertecant Flanges!
Since May, our new and biggest CNC-machine is fully operational. It is capable of machining flanges up to 1400mm diameter. It will guarantee the continuity of the machining process of our larger flange range. Besides this, it will cover the...
Hertecant Flanges NV has been approved by Exxon Mobile as Flange manufacturer. Herewith Hertecant is noted on the Qualifed Manufacturer List of Exxon Mobile, Piping-AML (Approved Manufacturers List) . This opens extra opportunities for all our contacts worldwide.
In January , we managed to produce a 28″ Cl150 Welding Neck Flange in 316L on our ring rolling machine. This flange was for one of our customers in Germany. Besides this, we also rolled the first titanium rings. We are continuously improving our...
Hertecant Flanges has the ambition to grow on a worldwide scale. Therefore we are looking for local representatives in several countries all around the globe. Their task is to look for new customers in their region on an independent base....